Weight blanket for Steel Cables
Weight blanket for Steel Cables
for weighting and visibility
Part-No. 1084561
- For better visibility of tensioned steel cables and chains
- Hung over the steel cable and fixed by means of magnets
- The weight reduces recoil in the event of a cable breakage (cable break damper)
- Made of tear-resistant Cordura incl. reflective stripes and abrasion protection
- Safety warning about safety range in German and English
This special weight blanket is the ideal addition for every cable winch or multipurpose hoist (grab hoist) and in our opinion belongs with the mandatory equipment! It is placed over the tensioned steel cable and provides a clear safety benefit. Thanks to the signal yellow colour and the additional reflective stripes (all around), the steel cable can also be seen at dusk and at night and does not become a dangerous tripping hazard.
Due to the additional weight (metal rods are incorporated in the damper), the steel cable is also loaded and, if it fails (breaks), it falls to the ground very quickly without whipping. This reduces the immediate danger zone. It is still important to maintain a sufficiently large safety distance from the cable, which is again brought to the attention of the emergency services by a warning notice on the recovery damper.
Perfect for fire brigade use with steel cables or chains, but also for private use with cable winches for off-road use or in the forest as a cable break damper. In other words, whenever pulling is carried out with slings that can fail suddenly without visible deformation during the pulling.
The safety advantages of the weight blanket at a glance:
- Significantly improve the visibility of tensioned winch ropes and multipurpose hoist ropes, especially at night and in poor weather and low visibility conditions.
- The weight of the cable break damper significantly reduces the whipping and lashing of a breaking steel cable (cable immediately falls to the ground)
- This achieves a reduction of the immediate danger area (damper placed in the middle of the steel cable)
- There is an additional notice printed in German and English about the safety range that should be maintained
- The recovery damper is hung over steel cables and fixed by means of magnets
- Made of tear-resistant Cordura (nylon fabric) incl. all-round reflective stripes and abrasion protection in the area of the steel rope.
- Suitable for fire brigade use with steel cables and chains, as well as off-road and forestry work
Technical data:
Dimensions: 55 × 70 cm (unfolded), 55 × 35 cm (folded)
Weight: 1.45 kg
Material: Cordura (nylon fabric)
Color: Signal yellow incl. reflective stripes (outside), black (inside)
Every 10 metres, we recommend using a protective cover for a steel cable to achieve optimum visibility and weight coverage!
This special weight blanket is the ideal addition for every cable winch or multipurpose hoist (grab hoist) and in our opinion belongs with the mandatory equipment! It is placed over the tensioned steel cable and provides a clear safety benefit. Thanks to the signal yellow colour and the additional reflective stripes (all around), the steel cable can also be seen at dusk and at night and does not become a dangerous tripping hazard.
Due to the additional weight (metal rods are incorporated in the damper), the steel cable is also loaded and, if it fails (breaks), it falls to the ground very quickly without whipping. This reduces the immediate danger zone. It is still important to maintain a sufficiently large safety distance from the cable, which is again brought to the attention of the emergency services by a warning notice on the recovery damper.
Perfect for fire brigade use with steel cables or chains, but also for private use with cable winches for off-road use or in the forest as a cable break damper. In other words, whenever pulling is carried out with slings that can fail suddenly without visible deformation during the pulling.
The safety advantages of the weight blanket at a glance:
- Significantly improve the visibility of tensioned winch ropes and multipurpose hoist ropes, especially at night and in poor weather and low visibility conditions.
- The weight of the cable break damper significantly reduces the whipping and lashing of a breaking steel cable (cable immediately falls to the ground)
- This achieves a reduction of the immediate danger area (damper placed in the middle of the steel cable)
- There is an additional notice printed in German and English about the safety range that should be maintained
- The recovery damper is hung over steel cables and fixed by means of magnets
- Made of tear-resistant Cordura (nylon fabric) incl. all-round reflective stripes and abrasion protection in the area of the steel rope.
- Suitable for fire brigade use with steel cables and chains, as well as off-road and forestry work
Technical data:
Dimensions: 55 × 70 cm (unfolded), 55 × 35 cm (folded)
Weight: 1.45 kg
Material: Cordura (nylon fabric)
Color: Signal yellow incl. reflective stripes (outside), black (inside)
Every 10 metres, we recommend using a protective cover for a steel cable to achieve optimum visibility and weight coverage!
Hat uns voll überzeugt!
Einfache Idee und ohne großen Aufwand zusätzlich anbringbar. Wir sind zwar nicht 100%ig überzeugt das die Decke das Herumschlagen komplett verhindert, aber das ist wirklich ein kleiner Aufwand für mehr Sicherheit unserer Kameraden!
Super Teil tip top verarbeitet